Сдам Сам

ПОЛЕЗНОЕ


КАТЕГОРИИ







Комплект материалов для итоговой аттестации по предмету





Card 1.

1.Закончите предложение:

1. Filling is … 2. By means of a file it is possible… 3. The widely used

2. Переведите слова:

chisel; to machine; an anvil; welding; hammer welding; to repair; nut wrench

3. Справедливы ли следующие утверждения? (“true” or “false”):

1. Hammers are stricking tools used in chipping, bending and other operations.

2. There are different types of chisels such as flat chisels, cape chisels etc.

3. Files are tools used in chipping.

4.Переведите предложения:

1. Hammers are made of tool carbon steel

2. Butt welding may be applied for welding pipes, rods etc.

3. There must be a metal container on the floor for the sparks

5.Соедините части предложения в одно:

kinds / machines / are / of / different/ drilling / there

6. Ответьте на вопросы:

1. What is a nut wrench?

2. Who uses nut wrenches?

Card 2

1.Закончите предложение:

1. A file is… 2. Various kinds of files … 3. Flat files are used…

2. Переведите слова:

stock; solid; acute angle; to cut; thermit welding; electric arc welding; to screw

3. Справедливы ли следующие утверждения?

1. Hammers are made of carbon steel.

2. Hammers are tools used in filling.

3. A chisel is made of very hard steel.

4.Переведите предложение:

На практике главным образом используют правую сварку.

5.Соедините части предложения в одно:

may be used / gas welding / for / cutting metals /implements/ and repairing

6. Ответьте на вопросы:

1. What do we use for screwing and unscrewing nuts of a definite type?

2. What mechanical tools do you know?

Card 3.

 

1.Закончите предложение:

1. Adjustable wrenches may be used for… 2. Socket wrenches are applied… 3. Half round files…

2. Переведите слова:

To remove; a piece of metal; sheet; gas welding; spot welding; single-ended wrench

3. Справедливы ли следующие утверждения?

1. Chipping is a process of removing metal from a workpiece by means of a file.

2. Chipping of large parts is always done on an anvil.

3. Nut wrenches are tools used in chipping.

4.Переведите предложение:

Сварка встык может быть использована для сварки труб, стержней и т.д.

5. Выберите правильный ответ:

In practice rightward welding …. mostly used.

a) am

b) is

c) are

d) will

6. Ответьте на вопросы:

1. What is filling?

2. When do we use file?

Card 4.

1.Закончите предложение:

1. Square files are used… 2. Round files… 3.Triangular files…

2. Переведите слова:

to tool; blade; strike; butt welding; electric welding; double-ended wrench

3. Переведите следующие предложения:

1.Welding is a process which provides a non-detachable joining of two like metal pieces by heating them till melting condition without or with mechanical pressure.

2. Socket wrenches are applied in cases when nuts or bolts located in recesses are hardly accesble for a nut wrench

4. Справедливы ли следующие утверждения:

1. Square files are used for filling lat surfaces

2. Flat files are used for filing flat surfaces

3. Round files are used for filling square holes

5. Ответьте на вопрос:

What is drilling?

Card 5.

1.Закончите предложение:

1. For filling soft metal…2. Adjustable wrenches may be used for… 3. Socket wrenches are applied…

2. Переведите слова:

forge; solid; cape chisel; rightward welding; non-detachable joining; dimensions

3. Справедливы ли следующие утверждения?

1. Round files are used for filling square holes.

2. Triangular files are used for filling angles.

3. Rasp files are used for filling metal in narrow places.

4.Переведите предложение:

1. Spot welding is used for welding parts of automobiles, refrigerators and airplanes.

2. In practice rightward welding is mostly used

5.Ответьте на вопросы:

1.By means of what tools is drilling performed?

2. Which is the most widely used tool for drilling?

Card 6.

1. Переведите слова:

Tools, hammer, file, nut, pliers, socket, shape, cutting pliers, screw, screwriver

2. Выберите правильный ответ:

What are flat files used for?

a) Flat files are used for filing square holes.

b) Flat files are used for filing round holes.

c) Flat files used for filing flat surfaces.

3. Справедливы ли следующие утверждения? (“true” or “false”):

1. Hammers are stricking tools used in chipping, bending and other operations.

2. There are different types of chisels such as flat chisels, cape chisels etc.

3. Files are tools used in chipping.

4. Соедините части предложения в одно:

kinds / machines / are / of / different/ drilling / there

5.Переведите предложение:

Resistance welding embraces such processes as spot welding, butt welding, electric arc welding, etc.

6.Ответьте на вопросы:

1. What material is a twist drill made of?

2. What are the principal parts of a twist drill?

Card 7

1. Закончите предложение:

1. Filling is … 2. By means of a file it is possible… 3. The most widely used

2. Переведите слова:

Chipping; hammer; to cut off; a bench vice; hard; flat chisel; bend; weight; labourconsuming process

3. Справедливы ли следующие утверждения?

1. Hammers are made of carbon steel.

2. Hammers are tools used in filling.

3. A chisel is made of very hard steel.

4. Соедините части предложения в одно:

may be used / gas welding / for / cutting metals /implements/ and repairing

5.Переведите предложение на английский:

Газовая сварка может быть использована для резки металлов и ремонта инструментов.

6. Ответьте на вопросы:

1. What are the cutting edges of a twist drill called?

2. What part of the twist drill gives it rigidity and strength?

Card 8

1.Закончите предложение:

1. Adjustable wrenches may be used for… 2. Socket wrenches are applied… 3. Half round files…

2. Переведите слова:

surface; groove; hammer; adjustable wrench; torch; additive; pipe; welder

3.Переведите предложение:

Сварка – это процесс который обеспечивает неразъёмное соединение двух одинаковых металлических кусков, нагревая их до состояния плавки

4. Выберите правильный ответ

Butt welding … applied for welding pipes, rods, etc

a) am

b)is

c)are

d)will

5Ответьте на вопросы:

1.What is file?

2. What kind of files do you know?

3. What kind of files are used for filling metal in narrow places?

 

Card 9

 

1.Закончите предложение:

1. Square files are used… 2. Round files… 3.Triangular files…

2. Переведите слова:

forge; solid; cape chisel; rightward welding; non-detachable joining; dimensions

3. Справедливы ли следующие утверждения? (“true” or “false”):

1. Hammers are stricking tools used in chipping, bending and other operations.

2. There are different types of chisels such as flat chisels, cape chisels etc.

3. Files are tools used in chipping

4. Соедините части предложения в одно:

may be used / gas welding / for / cutting metals /implements/ and repairing

5. Переведите на английский

Газовую сварку применяют при изготовлении тонких стальных изделий

6. Переведите на русский:

In autogenous welding the source of heat is the gas flame obtained from a gas which is often acetylene

Card 10

1.Закончите предложение:

1. Adjustable wrenches may be used for… 2. Socket wrenches are applied… 3. Half round files…

2. Переведите слова:

chisel; to machine; an anvil; welding; hammer welding; to repair; nut wrench

3. Переведите следующие предложения:

1.Welding is a process which provides a non-detachable joining of two like metal pieces by heating them till melting condition without or with mechanical pressure.

2. Socket wrenches are applied in cases when nuts or bolts located in recesses are hardly accesble for a nut wrench

4.Переведите предложения:

1. Hammers are made of tool carbon steel

2. Butt welding may be applied for welding pipes, rods etc.

3. There must be a metal container on the floor for the sparks

5.Ответьте на вопросы:

1.By means of what tools is drilling performed?

2. Which is the most widely used tool for drilling?

 

 







ЧТО И КАК ПИСАЛИ О МОДЕ В ЖУРНАЛАХ НАЧАЛА XX ВЕКА Первый номер журнала «Аполлон» за 1909 г. начинался, по сути, с программного заявления редакции журнала...

Что вызывает тренды на фондовых и товарных рынках Объяснение теории грузового поезда Первые 17 лет моих рыночных исследований сводились к попыткам вычис­лить, когда этот...

Что делает отдел по эксплуатации и сопровождению ИС? Отвечает за сохранность данных (расписания копирования, копирование и пр.)...

Живите по правилу: МАЛО ЛИ ЧТО НА СВЕТЕ СУЩЕСТВУЕТ? Я неслучайно подчеркиваю, что место в голове ограничено, а информации вокруг много, и что ваше право...





Не нашли то, что искали? Воспользуйтесь поиском гугл на сайте:


©2015- 2024 zdamsam.ru Размещенные материалы защищены законодательством РФ.